List Of Predefined Subprograms; Predefined Subroutine Calls - Siemens SINUMERIK 840Di sl Programming Manual

Tables

12.4 List of predefined subprograms

WALCS4
5 WCS working area limitation group 4 active
WALCS5 6 WCS working area limitation group 5 active
WALCS6 7 WCS working area limitation group 6 active
WALCS7 8 WCS working area limitation group 7 active
WALCS8 9 WCS working area limitation group 8 active
WALCS9 10 WCS working area limitation group 9 active
WALCS10 11 WCS working area limitation group 10 active
12.4 List of predefined subprograms
12.4.1

Predefined subroutine calls

List of predefined subroutines
The list of predefined subroutines contains all available subroutines grouped according to
function.
Some control functions are activated with subroutine call syntax.
1. Coordinate system
Keyword/ 1st parameter
function
identifier
PRESETON AXIS*:
Axis identifier
Machine axis
DRFOF
*) As a general rule, geometry or special axis identifiers can also be used instead of the
machine axis identifier, as long as the reference is unambiguous.
494
2nd parameter 3rd-15th
parameter
REAL: 3.-15.
Preset offset Parameter as
1 ...
G700/G7100
context
4th-16th Explanation
parameter
4.-16. Sets the actual value for programmed
parameter axes.
as 2 ... One axis identifier is programmed at a
time, with its respective value in the
next parameter.
PRESETON can be used to program
preset offsets for up to 8 axes.
Deletes the DRF offset for all axes
assigned to the channel.
Programming Manual, 11/2006, 6FC5398-1BP10-2BA0
m
m
m
m
m
m
m
Fundamentals