Siemens SINUMERIK 840Di sl Programming Manual page 467

Name Meaning
TMOF
Deselect tool monitoring
TMON Activate tool monitoring
TO Defines the end value in a FOR counter
loop
TOFFOF Deactivate on-line tool offset
TOFFON Activate online tool length offset
(Tool offset ON)
TOFRAME Set current programmable frame to tool
coordinate system
TOFRAMEX X axis parallel to tool direction, secondary
axis Y, Z
TOFRAMEY Y axis parallel to tool direction, secondary
axis Z, X
TOFRAMEZ Z axis parallel to tool direction, secondary
axis X, Y
TOLOWER Convert letters of the string into lowercase
TOROTOF Frame rotations in tool direction OFF
TOROT Z axis parallel to tool orientation
TOROTX X axis parallel to tool orientation
TOROTY Y axis parallel to tool orientation
TOROTZ Z axis parallel to tool orientation
TOUPPER Convert letters of the string into uppercase
TOWSTD Initial setting value for offsets in tool length
TOWBCS Wear values in basic coordinate system
(BCS)
TOWKCS Wear values in the coordinate system of
the tool head for kinetic transformation
(differs from MCS by tool rotation)
TOWMCS Wear data in the machine coordinate
system (MCS)
Fundamentals
Programming Manual, 11/2006, 6FC5398-1BP10-2BA0
Value Description,
comment
T-no. required
only when the
tool with this
number is not
active.
T No. = 0:
Deactivate
monitoring for
all tools
Specify a 3D
offset direction.
Frame rotation
in tool direction.
Frame rotations
EIN
Rotary
component of
the
programmable
frame
Inclusion of tool
wear
12.1 List of statements
Syntax
TMOF (T no.)
TMON (T no.)
TOFFON (Z, 25) with
offset direction Z,
offset value 25
Tables
m/s Group
3 2
m 53
m 53
m 53
m 53
m 53
m 53
m 53
m 53
m 53
m 56
m 56
m 56
m 56
467