Siemens SINUMERIK 840Di sl Programming Manual page 443

Name Meaning
ENABLE
Interrupt ON
ENAT Natural transition to next traversing block
1, 7
(end natural)
ENDFOR End line of FOR counter loop
ENDIF End line of IF branch
ENDLOOP End line of endless program loop LOOP
ENDPROC End line of program with start line PROC
ENDWHILE End line of WHILE loop
ETAN Tangential transition to next traversing
block at spline end (end tangential)
EVERY Execute synchronized action if condition
changes from FALSE to TRUE
EXECSTRING Transfer of a string variable with the part
program line to run
EXECTAB Execute an element from a motion table
(execute table)
EXECUTE Program execution ON
EXP Exponential function (e
EXTCALL Execute external subprogram
EXTERN Broadcast a subprogram with parameter
passing
F Feed value
(in conjunction with G4
the dwell time is also
programmed in F)
Fundamentals
Programming Manual, 11/2006, 6FC5398-1BP10-2BA0
Value Description,
comment
Indirect part
program line
Return from the
reference-point
edit mode or
after building a
protection area
to normal
program
processing.
) real
x
Reload program
from HMI in
"Execution from
external
source" mode.
0.001, ..., Path veloc.
99999.999 of a
tool/workpiece;
unit: mm/min or
mm/revolution
depending on
G94 or G95
12.1 List of statements
Syntax
EXECSTRING(MFCT1
<< M4711)
F=100 G1 ...
Tables
m/s Group
3 2
m 20
m 20
443