Siemens SINUMERIK 840Di sl Programming Manual page 442

Tables
12.1 List of statements
Name Meaning
DISR
Distance for repositioning
DITE Thread run-out path
DITS Thread run-in path
DIV Integer division
DL Total tool offset
DRFOF Deactivate the handwheel offsets (DRF)
DRIVE Velocity-dependent path acceleration
7, 9
DRIVEA Switch on bent acceleration characteristic
curve for the programmed axes
DYNFINISH Dynamic for smooth-finishing
DYNNORM Standard dynamic, as previously
DYNPOS Dynamics for positioning mode, tapping
DYNROUGH Dynamic for roughing
DYNSEMIFIN Dynamic for finishing
EAUTO Definition of last spline segment by the last
3 points
(end not a knot)
EGDEF Definition of an electronic gear
(electronic gear define)
EGDEL Delete coupling definition for the following
axis
(electronic gear delete)
EGOFC Switch off electronic gear continuously
(electronic gear OFF continuous)
EGOFS Switch off electronic gear selectively
(electronic gear OFF selective)
EGON Switch on electronic gear
(Electronic gear ON)
EGONSYN Switch on electronic gear
(electronic gear ON synchronized)
EGONSYNE Switch on electronic gear, stating
approach mode
(electronic gear ON synchronized)
ELSE Program branch, if IF condition not fulfilled
442
Value Description,
comment
Real, without
sign
Real
Real
INT
Technology
G group
For 1 following
axis with
up to 5 leading
axes
Stops the
preprocessing.
Without
synchronization
.
With
synchronization
.
With
synchronization
.
Syntax
DYNFINISH G1 X10
Y20 Z30 F1000
DYNNORM G1 X10
DYNPOS G1 X10 Y20
Z30 F...
DYNROUGH G1 X10
Y20 Z30 F10000
DYNSEMIFIN G1 X10
Y20 Z30 F2000
Programming Manual, 11/2006, 6FC5398-1BP10-2BA0
m/s Group
3 2
s
m
m
m
m
m 21
m 59
m 59
m 59
m 59
m 59
m 20
Fundamentals