Deselect Drf (Handwheel) Offsets, Overlaid Motions (Drfof, Corrof) - Siemens SINUMERIK 840Di sl Programming Manual

Deactivate coordinate transformation
A distinction must be made here between non-modal suppression and modal deactivation.
Programming
G53
Or
G153
Or
SUPA
Or
G500
Parameters
Non-modal suppression:
G53
G153
SUPA
Modal deactivation:
G500
Deleting FRAMES:
TRANS, ROT, SCALE,
MIRROR
6.10 Deselect DRF (handwheel) offsets, overlaid motions (DRFOF,
CORROF)
Function
DRFOF can be used to deactivate all active axes of the channel for DRF handwheel offsets.
Fundamentals
Programming Manual, 11/2006, 6FC5398-1BP10-2BA0

6.10 Deselect DRF (handwheel) offsets, overlaid motions (DRFOF, CORROF)

Deactivation of all programmable and settable frames
Deactivation of all programmable, settable and basic frames
Deactivation of all programmable, settable frames, DRF handwheel offsets,
external zero offsets and preset offset
Deactivation of all settable frames if G500 does not contain a value
Programming without specifying the axis → clearing the programmable
frames
Frames
265