Setting Data; Channelspecific Setting Data; Signals; Signals To/From Bag - Siemens SINUMERIK 840D sl Function Manual

K5: Channel synchronization, axis interchange
6.3 Data lists
Number Identifier: $MA_
30552 AUTO_GET_TYPE
30600 FIX_POINT_POS
32074 FRAME_OR_CORRPOS_NOTALLOWED
33100 COMPRESS_POS_TOL
6.3.2

Setting data

6.3.2.1

Channelspecific setting data

Number Identifier: $SC_
42000 THREAD_START_ANGLE
42100 DRY_RUN_FEED
6.3.3

Signals

6.3.3.1

Signals to/from BAG

The mode group signals from the PLC to the NCK and from the NCK to the PLC are included
in data block 11.
The signals are described in:
Reference:
Function Manual, Basic Functions; NC/PLC Interface Signals (Z1),
Chapter "Mode group, Program Operation (K1)"
6.3.3.2

Signals to/from Channel

The channel signals from the PLC to the NCK and from the NCK to the PLC are included in
data blocks 21, 22, ... for the first, second ... channel.
The signals are described in:
Reference:
Function Manual, Basic Functions; NC/PLC Interface Signals (Z1),
Chapter "Mode group, Program Operation (K1)"
386
Description
Definition of automatic GET
Fixed value positions of axes with G75
Frame or HL offset are not allowed
Maximum deviation with compensation
Description
Start angle for thread
Dry run feedrate
Function Manual, 10/2015, 6FC5397-1BP40-5BA3
Extended Functions