B3: Distributed systems - 840D sl only
3.1
Brief description
3.1.1
Several operator panels on several NCUs (T:M:N)
Under certain circumstances, a single operator control and monitoring station may not be
sufficient for complex plants and machines. Therefore, several operator control and monitoring
stations in a SINUMERIK system network (Ethernet) can be connected to several numerical
controls (NCU) via a PCU in such a way that they enable flexible and distributed operation and
monitoring of the entire system.
The following figure provides an overview of the components that currently can be connected
in a system network to form an operator control and monitoring system T:1:N. Meanings:
● T: Thin Client Unit (TCU) or HT8 handheld unit (connected to the PCU)
● 1 (M): Man Machine Control (MMC), PCU 50.x with SINUMERIK Operate
● N: Numeric Control Unit (NCU), NCU 7x0.3 PN
Extended Functions
Function Manual, 10/2015, 6FC5397-1BP40-5BA3
3
75