7
Installing the Seat
Model No. 31902 Only
Parts needed for this procedure:
Seat Kit (ordered separately; refer to your authorized
1
Toro distributor)
Procedure
Install the seat; refer to the Seat Kit Installation
Instructions.
8
Installing the Steering
Wheel
Model No. 31902 Only
Parts needed for this procedure:
1
Steering wheel
1
Cover
Procedure
1.
Remove the steering wheel from the shipping
skid
(Figure
13).
1. Cover
2. Nylock nut
3. Washer
2.
Remove the nylock nut and washer from the
steering shaft.
Note:
Ensure that the foam collar remains on
the steering shaft
3.
Slide the steering wheel and washer onto the
steering shaft
4.
Use the nylock nut to secure the steering wheel
to the shaft. Tighten the nylock nut to 27 to 35
N∙m (20 to 26 ft-lb).
5.
Mount the cover to the steering wheel
13).
15
Figure 13
4. Steering wheel
5. Foam collar
(Figure
13).
(Figure
13).
g307379
(Figure