Width Specifications; Attachments/Accessories; Before Operation; Before Operation Safety - Toro Groundsmaster 3300 Series Operator's Manual

Description
Height with roll bar raised
Height with roll bar lowered
Height with cab
Overall length (rear weights equipped)
Overall length (no rear weights equipped)
Overall width
Wheel-base length
Front-wheel tread width
Rear-wheel tread width
Ground clearance
Net weight (Model No. 31902)
Net weight (Model No. 31903)

Width Specifications

Refer to the following table for width measurements
per your equipped cutting unit:
Cutting Unit
Model No. 31970
Model No. 31971
Model No. 31972
Model No. 31973
Model No. 31974
Model No. 31975
Model No. 02835 (Flail)

Attachments/Accessories

A selection of Toro approved attachments and
accessories is available for use with the machine
to enhance and expand its capabilities. Contact
your Authorized Service Dealer or authorized Toro
distributor or go to www.Toro.com for a list of all
approved attachments and accessories.
To ensure optimum performance, use only
genuine Toro replacement parts and accessories.
Replacement parts and accessories made by other
manufacturers could be dangerous, and such use
could void the product warranty
Width
198 cm (78 inches)
168 cm (66 inches)
228 cm (90 inches)
198 cm (78 inches)
158 cm (62 inches)
188 cm (74 inches)
218 cm (86 inches)
Operation

Before Operation

Before Operation Safety

General Safety
•
Never allow children or untrained people to
operate or service the machine. Local regulations
may restrict the age of the operator. The owner
is responsible for training all operators and
mechanics.
•
Become familiar with the safe operation of the
equipment, operator controls, and safety signs.
•
Shut off the engine, remove the key, and wait
for all movement to stop before you leave the
operator's position, Allow the machine to cool
before adjusting, servicing, cleaning, or storing it.
•
Know how to stop the machine and shut off the
engine quickly.
•
Check that operator-presence controls, safety
switches, and guards are attached and functioning
properly. Do not operate the machine unless they
are functioning properly.
•
Before mowing, always inspect the machine to
ensure that the blades, blade bolts, and cutting
assemblies are in good working condition.
23
Figure 23 Dimension or Weight
reference
D 200 cm (79 inches)
C 111 cm (44 inches)
H 226 cm (89 inches)
Maximum of 332 cm
G
(131 inches)
Maximum of 312 cm
F
(123 inches)
Refer to
B
Specifications (page
E
131 cm (51-1/2 inches)
107 cm (42 inches)
A
104 cm (41 inches)
21 cm (8-5/16 inches)
855 kg (1,886 lb)
1,128 kg (2,486 lb)
Width
23).