Replacing The Dome Light; Filling The Windshield-Wiper-Fluid Reservoir - Toro Groundsmaster 3300 Series Operator's Manual

Figure 77
1. Latch-mount assembly
2. Condenser filter

Replacing the Dome Light

Note:
Refer to the Parts Catalog for the appropriate
bulb part number.
1. Use a screwdriver to remove the light lens from
the control panel.
Figure 78
1. Screwdriver
2. Bulb
2. Remove the bulb from the light base
3. Install a new bulb into the light base.
4. Install the lens into the control panel.
3. Screen cover
(Figure 78).
3. Lens
(Figure
Filling the
Windshield-Wiper-Fluid
Reservoir
Note:
The windshield-wiper-fluid reservoir is located
next to the engine on the right side of the machine.
1. Remove the cap
g032951
1. Reservoir cap
2. Fill the reservoir with wiper fluid.
3. Replace the cap on the reservoir.
g253616
78).
61
(Figure 79) on the reservoir.
Figure 79
2. Reservoir
g312210