9
Installing the Bumper
Model No. 31902 Only
Parts needed for this procedure:
1
Bumper
2
Bolt (3/8 x 2-3/4 inches)
4
Bolt (3/8 x 3-1/4 inches)
6
Nut (3/8 inch)
Procedure
1.
Remove the bumper from the shipping skid.
2.
Use 4 bolts (3/8 x 3-1/4 inches) and 4 nuts (3/8
inch) to secure the upper area of the bumper to
the machine frame
(Figure
14).
1. Bolt (3/8 x 3-1/4 inches)
2. Bumper
3.
Use 2 bolts (3/8 x 2-3/4 inches) and 2 nuts (3/8
inch) to secure the bumper under the machine
frame
(Figure
10
Connecting the Battery
Model No. 31902 Only
No Parts Required
Procedure
Connect the battery; refer to
(page
49).
16
Figure 14
3. Bolt (3/8 x 2-3/4 inches)
14).
Connecting the Battery
g302775