Huawei NetCol5000-C Series User Manual page 183

NetCol5000-C030 In-row Chilled Water Smart Cooling
Product
User Manual (Simple Configuration)
Procedure
Step 1 Open the rear door.
Step 2 Remove the air filters.
Step 3 Use a Phillips screwdriver to remove the R-shaped pipe clip that secures the air intake
temperature sensor on the rear door post.
Figure 6-12 Air intake temperature sensor
Step 4 Remove the waterproof connector from the sensor cable.
Step 5 Secure a new air intake temperature sensor to the original position using the R-shaped pipe
clip.
Step 6 Reconnect the waterproof connector to the sensor cable.
Step 7 Install the air filters. For details, see
Step 8 Close and lock the rear door.
----End
Issue 09 (2020-01-10)
5.5 Follow-up
Copyright © Huawei Technologies Co., Ltd.
6 System Operation and Maintenance
Procedure.
174