Huawei NetCol5000-C Series User Manual page 186

NetCol5000-C030 In-row Chilled Water Smart Cooling
Product
User Manual (Simple Configuration)
Figure 6-14 Replacing the rectifier
The figure is for NetCol5000-C030H6B2010020E1 only.
Step 4 Pull out the buckle, as shown by (2) in
from the plug-in frame.
Make sure the buckle is on the lower right side when inserting a new rectifier module.
Step 5 Replace the rectifier and insert the new rectifier to the corresponding slot of the power
distribution subrack.
Step 6 Push the spare rectifier module to the plug-in frame and connect the cable, and then push
downward the buckle button to lock the rectifier module.
Step 7 Install the air filters and rear door.
Step 8 Power on the rectifier and check whether the rectifier works properly.
----End
Issue 09 (2020-01-10)
Figure
Copyright © Huawei Technologies Co., Ltd.
6 System Operation and Maintenance
6-14, and then pull out the rectifier module
177