Initiating A Conference From The Address Book Screen; Initiating A Conference From The Call Screen; Scheduling A Conference - Huawei RP100-55T User Manual

HUAWEI RP100-55T Room Presence
User Guide


----End

5.1.3 Initiating a Conference from the Address Book Screen

If sites to participate in a conference are stored in the local address book, you can define these
sites and set conference parameters from the Address Book screen to initiate a conference.
To initiate a conference from the Address Book screen, do the following:
Step 1 From the home screen, select Address Book to display the Address Book screen.
Step 2 Select a site or multiple sites participating in the conference.



----End

5.1.4 Initiating a Conference from the Call Screen

You can initiate a two-party conference by defining the site to participate in the conference
and setting the call rate and call type from the Call screen.
To initiate a conference from the Call screen, do the following:
Step 1 From the home screen, select Call to display the Call screen.
Step 2 Enter the name, IP address, or telephone number of the site. Then set the call rate and call
type.
Step 3 Press
----End

5.1.5 Scheduling a Conference

You can schedule a conference to be held during a specific period.
The RP100-55T supports the function to schedule conferences when H.323, E1, or 4E1 lines
are used.
Issue 01 (2013-12-20)
If the selected entry is a conference, press
consecutively to initiate a multi-party conference.
Press to edit the entry or
If you select a site, you can press
to place a call to the site immediately or Create Conference to initiate a conference.
If you select multiple sites, you can press
conference.
Press to edit the selected site or
From the home screen, you can access the Call screen directly by pressing a number key on the remote
control.
on the remote control to call the other party.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
or on the remote control twice
to delete the entry.
on the remote control, and then select Place Call
on the remote control to initiate a
to delete the selected site.
5 Conference Initiation
37