HUAWEI RP100-55T Room Presence
User Guide
5.4.2 Enabling the H.239 Mode
After enabling the H.239 mode, the video and the presentation can be sent simultaneously
during a conference.
For details about how to enable the H.239 mode, see section 5.3 "Setting Conference
Parameters." By default, the H.239 mode is enabled on the RP100-55T.
The H.239 mode supports Presentation and Live.
5.4.3 Sharing a Presentation
If the video source of the presentation has been configured, and the presentation parameters
have been set, you can connect a computer to the RP100-55T to share files stored on the
computer. When you are sharing files on the computer, the remote sites can view your video
and the desktop contents of the computer. You can press
presentation.
You can select one of the following modes for sharing a presentation based on the
configuration:
5.4.4 Viewing the Combined Picture of the Presentation and the
Video
During a conference, a combined picture of the video and the presentation can be viewed by
pressing
5.5 Joining an Authentication Conference
If the number of sites that are expected to join the conference is not known, you can set the
number of anonymous sites, and then hold an authentication conference. A site can join the
authentication conference by calling the conference access number.
Figure 5-1 shows how to join an authentication conference.
Issue 01 (2013-12-20)
Presentation: When the video is switched, the presentation remains unchanged. This
mode is used when the presentation carries images, such as slides.
Live: The presentation viewed by each site is switched along with the video. This mode
is used when the presentation carries videos.
Auto: The RP100-55T automatically sends the video along with the presentation. This
option is available when the H.239 mode is set to Live.
Manual: Use the remote control to share a presentation.
on the remote control.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
5 Conference Initiation
to start or stop sharing a
41