Answering Incoming Calls And Ending A Conference; Setting The Answering Mode; Ending A Conference - Huawei RP100-55T User Manual

HUAWEI RP100-55T Room Presence
User Guide
To schedule a conference, do the following:
Step 1 Choose Utilities > Schedule Conference.
Step 2 Schedule a conference using either of the following methods:


----End
After a conference is scheduled successfully, you can find the conference by selecting
Schedule Conference and then Scheduled Conferences.

5.2 Answering Incoming Calls and Ending a Conference

The mode for answering incoming calls can be set.

5.2.1 Setting the Answering Mode

Two answering modes are available on the RP100-55T: answering incoming calls manually
and answering incoming calls automatically.
To set the answering mode, do the following:
Step 1 Select Settings > General.
If the automatic answering function is enabled, the RP100-55T answers incoming calls
automatically.
If the automatic answering function is disabled, when there is an incoming call, a message
appears on the screen indicating that a remote codec is calling. Use the remote control to
answer or reject the call.
The automatic answering function is disabled by default.
Step 2 Save the settings.
----End

5.2.2 Ending a Conference

To end or exit from a conference, end the relevant call.
To end a conference, do the following:
Step 1 Press
Step 2 When a message is displayed, confirm that you want to end the call or exit from the
conference.
----End
Issue 01 (2013-12-20)
Select a conference from Favorite Conferences, set Start date, Time format, Start
time, and Conference duration (ranging from 30 min to 360 min), and then select OK.
Select Create, set site and conference parameters, set Start date, Time format, Start
time, and Conference duration (ranging from 30 min to 360 min), and then select OK.
on the remote control.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
5 Conference Initiation
38