Huawei RP100-55T User Manual page 74

HUAWEI RP100-55T Room Presence
User Guide
Parameter
SSH login
Serial a landing
Serial 2 landing
Serial port 1 password
Serial port 2 password
upgrade password
Step 2 Save the settings.
----End
Issue 01 (2013-12-20)
Description
maintain the RP100-55T.
By default, the user name and password used for Telnet
logins are both debug.
Change the password at your first login and keep your
new password secret to prevent unauthorized logins.
NOTE
If your computer to telnet to the RP100-55T runs Linux, specify
the Telnet port on the RP100-55T by running telnet RP100-55T
IP address port number. For example, run telnet 10.11.12.123 23
if 23 is the port number.
Specifies whether to enable users to remotely log in to
your endpoint using Secure Shell (SSH). SSH clients use
ciphertext to communicate with the endpoint. The SSH
login function is enabled, and a maximum of three
concurrent SSH logins are allowed.
By default, the user name and password used for SSH
logins are both debug.
Change the password at your first login and keep your
new password secret to prevent unauthorized logins.
This specifies whether you can use the COM1 and COM2
serial ports to log in to the RP100-55T from a computer
for debugging or troubleshooting.
This specifies the password used to connect to the
RP100-55T serial ports COM1 and COM2.
The user names used to connect to the COM1 and COM2
ports are DEBUG SHELL and DEBUG TELNET
respectively. The default passwords are both
viewpoint9000.
This specifies the password required to upgrade the
RP100-55T software using the upgrade tool or the web
interface.
The default password is viewpoint9000. To ensure device
security, change the password when you first log in to a
string comprising uppercase and lowercase letters, digits,
and special characters.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
10 Security
66