Audio - Huawei RP100-55T User Manual

HUAWEI RP100-55T Room Presence
User Guide
Problem
After the local site
joins a conference, a
remote video is
displayed. On the
camera control
screen, the remote
camera cannot be
controlled by
pressing
or arrow keys. In
other words, the
remote video
remains unchanged
after you press
relevant keys.

12.2.5 Audio

Table 12-10 describes the troubleshooting methods for audio-related problems.
Table 12-10 Troubleshooting methods for audio-related problems
Problem
The local site joins a
conference. No
audio, however, is
output from the
local display.
Issue 01 (2013-12-20)
Possible Cause
Remote control is disabled on
the remote camera.
The camera to be controlled is
a 3CCD camera.
, ,
The camera settings are
incorrect or the control cable
of the camera is connected
insecurely.
Possible Cause
Perform an audio test to check
whether the problem arises at
the local site or a remote site.
If no audio is output from the
display when the audio test is
performed, it indicates that the
problem exists at the local
site.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
12 Maintenance and Troubleshooting
Solution
Contact and request the
administrator to enable the remote
control of the camera at the remote
site.
If a 3CCD camera, reset the
camera. The camera should then
be controllable by pressing
, or arrow keys.
Contact and request the
administrator of the remote site to
reset the camera parameters or
connect the camera control cable
properly.
Solution
 The chair site has muted the
speaker of the local site.

If the volume of the display is
adjusted to the minimum value,
restore the volume to the
default value.
 If the volume of the
RP100-55T is adjusted to the
minimum value, restore the
volume to the default value.
 If the audio cable is not
connected correctly or securely,
connect the audio cable
properly.
,
82