Huawei RP100-55T User Manual page 52

HUAWEI RP100-55T Room Presence
User Guide
Parameter
Category
Number
Type
Rate
IP address
Step 3 Select Save.
----End
Creating a Group
If certain sites join a conference regularly, they can be defined as a group.
To create and define a group, do the following:
Step 1 On the Address Book screen, select Create Group to display the Create Group screen.
Step 2 Enter a name for the group in the text box. The name cannot consist of only digits.
Step 3 Select the sites to be added to the group from the address book. Each selected site is marked
with a tick (√) before the site name and all the sites that are added to the group appear in the
site list.
Step 4 Select Save.
----End
Modifying
To modify the parameter settings of a defined site or group, scroll to the site or the group, and
then select
Issue 01 (2013-12-20)
Description
This specifies the conferencing scenario of a site. The following
describes different options:

If the site attends conferences hosted using traditional
videoconferencing systems, select Ordinary site.
 If the site attends conferences hosted using Huawei
telepresence systems, select Telepresence site.
 If the site is a Cisco TelePresence site and attends conferences
held using Huawei videoconferencing systems, select CT site.
This specifies the site number used to make calls between sites.

IP, SIP, and H.323 Phone site numbers are allocated by the
videoconferencing service provider.
 PSTN site numbers are telephone numbers.
This specifies the line used by the RP100-55T to access the
videoconferencing network.
This specifies the rate supported by the RP100-55T over the
corresponding access line used by the site.
It is recommended that you select the highest rate.
This specifies the IP address of the site.
, after the site name or the group name.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
5 Conference Initiation
44