Remote Management From The Web Interface; Allowing Login From The Web Interface; Configuring A Web Browser - Huawei RP100-55T User Manual

Room telepresence systems

Table of Contents

HUAWEI RP100-55T Room Presence

User Guide

Users can log in to the RP100-55T from the web interface only after the administrator of the

RP100-55T allows them to do so.

From the remote control user interface, the option of allowing users to access the RP100-55T

from the web interface can be set. For details, see section 10.2.4 "Allowing Remote Login."

Before accessing the RP100-55T from the web interface, the browser must be configured.

This section takes Window XP as an example and describes how to configure Internet

Explorer 6 and Firefox 3.0.10. Other versions of Internet Explorer and Firefox can be

configured using the method for configuring Internet Explorer 6 and Firefox 3.0.10.

To configure a Web browser for accessing the RP100-55T, do the following:

Step 1 Launch Internet Explorer.

Step 2 Choose Tools > Internet Options. In the displayed dialog box, click the Security tab.

Step 3 Click Custom Level. In the displayed dialog box, enable Active Scripting and all the

parameters under Downloads, and then click OK.

Step 4 Click Trusted sites, and then Sites to display the Trusted sites dialog box.

Step 5 Enter the IP address of the codec, click Add, and then click OK.

Step 6 Click the Privacy tab, set the slider label to Medium, and then click OK.

The method for configuring Firefox is similar to that of configuring Internet Explorer.

Issue 01 (2013-12-20)

Remote Management from the Web

It is not recommended that earlier versions of Firefox than 3.0.10 be used.

If operations described in Step 4 are not carried out, from the Internet Explorer menu bar, choose Tools >

Pop-up Blocker > Turn Off Pop-up Blocker to disable the pop-up blocker.

Huawei Proprietary and Confidential

11 Remote Management from the Web Interface

Interface

Table of Contents

V100r001c03b014