Huawei PDU8000 User Manual page 34

PDU8000 Modular Integrated PDC V1.0
User Manual
Figure 5-8 Leveling the feet
Step 2 Level the PDC using a level and an adjustable wrench.
Issue 07 (2019-04-15)
 Wrench an anchor bolt clockwise to elevate a cabinet leg, or wrench an anchor bolt anticlockwise to
lower it. The cabinet feet can be adjusted within a range of 0–8 mm.
 To prevent cabinet tilting, adjust all the feet at the four corners instead of one foot.

Use a measuring tape for measurement when leveling the cabinet to ensure that the height between
the cabinet top and the ground is 2000 mm (tolerance ± 3 mm).

Do not remove anchor bolts as the reinstallation can be difficult when you need to use them.
Copyright © Huawei Technologies Co., Ltd.
5 Installation Guide
27