Installing Expansion Sleeves - Huawei PDU8000 User Manual

Modular integrated pdc v1.0

Hide thumbs Also See for PDU8000:

Table of Contents

PDU8000 Modular Integrated PDC V1.0

User Manual

Figure 5-5 Mounting hole positions at the 1200 mm deep cabinet bottom

----End

5.4.2.2 Installing Expansion Sleeves

Procedure

Step 1 Drill a hole at the position for installing the expansion bolt using a hammer drill with the hole

depth of 52 mm to 60 mm.

Step 2 Partially tighten the expansion bolt and vertically insert it into the hole. Knock the expansion

bolt using a rubber mallet until the expansion sleeve is fully inserted into the hole.

Step 3 Rotate the expansion bolt clockwise using a wrench until the expansion sleeve fully expands.

Step 4 Rotate the expansion bolt counterclockwise to remove it together with the spring washer and

flat washer.

Issue 07 (2019-04-15)

Put aside the removed expansion bolt for securing the PDC.

5 Installation Guide

Table of Contents