PDU8000 Modular Integrated PDC V1.0
User Manual
Figure 5-18 Securing the tail frame
Step 7 Install the hinges and connecting plates removed in
the tail frame.
Step 8 Install the PDC rear door on the tail frame.
After installing the PDC rear door, ensure that ground cables are properly connected to the
cabinet and PDC rear door.
----End
5.4.5 Combining Cabinets
Procedure
Step 1 Open the front and rear doors of the PDC. Wrench the anchor bolts using an adjustable
wrench to adjust the PDC height. Use a level to level the PDC.
Issue 07 (2019-04-15)
Align the upper and lower holes before tightening screws.
The tail frame side with anchor bolts should face the cabinet bottom.
Copyright © Huawei Technologies Co., Ltd.
Step 4
on the corresponding positions on
5 Installation Guide
35