PDU8000 Modular Integrated PDC V1.0
User Manual
Figure 8-6 Mounting holes
(1) mounting holes
Step 7 Reinstall the panel on the PDC.
----End
8.4.2 Replacing a Hot-Swap Circuit Breaker
Prerequisites
Procedure
There are 1- and 3-pole hot-swappable circuit breakers. This section uses the 1-pole circuit
breaker as an example.
Step 1 Open the cabinet front door, and switch the circuit breakers to be installed to OFF.
Step 2 Remove the front panel of the output module.
Issue 07 (2019-04-15)
Tools required: circuit breaker extracting kit, Phillips screwdriver, key to the PDC door.
Materials required: circuit breakers of the correct model.
Obtain the circuit breaker extracting kit from the file box on the PDC front door.
Copyright © Huawei Technologies Co., Ltd.
8 Operation and Maintenance
77