PDU8000 Modular Integrated PDC V1.0
User Manual
Figure 7-8 Information export 3
----End
7.2.2 Configuration Loading
The configuration loading function enables you to set system parameters for a PDC.
Context
Note that the configuration loading function may change the original parameter values of a
PDC. Therefore, use this function with caution.
Procedure
Step 1 Connect a USB flash drive to the USB host port. After the message New USB flash drive
detected. is displayed, log in to the maintenance screen as user admin and tap Load Config.
The maintenance screen is displayed.
Issue 07 (2019-04-15)
Copyright © Huawei Technologies Co., Ltd.
7 MDU Commissioning Guide
64