Data Lists; Machine Data; General Machine Data; Axis/Spindlespecific Machine Data - Siemens SINUMERIK 840D Function Manual

8.7

Data lists

8.7.1

Machine data

8.7.1.1

General machine data

Number Identifier: $MN_
10260 CONVERT_SCALING_SYSTEM
10270 POS_TAB_SCALING_SYSTEM
10900 INDEX_AX_LENGTH_POS_TAB_1
10910 INDEX_AX_POS_TAB_1[n]
10920 INDEX_AX_LENGTH_POS_TAB_2
10930 INDEX_AX_POS_TAB_2[n]
10940 INDEX_AX_MODE
8.7.1.2

Axis/spindlespecific machine data

Number Identifier: $MA_
30300 IS_ROT_AX
30310 ROT_IS_MODULO
30320 DISPLAY_IS_MODULO
30500 INDEX_AX_ASSIGN_POS_TAB
30501 INDEX_AX_NUMERATOR
30502 INDEX_AX_DENOMINATOR
30503 INDEX_AX_OFFSET
30505 HIRTH_IS_ACTIVE
8.7.2

Setting data

8.7.2.1

General setting data

Number Identifier: $SN_
41050 JOG_CONT_MODE_LEVELTRIGGRD
Axes and spindles
Function Manual, 06/2019, A5E47437747B AA
Description
Basic system switchover active
System of measurement of position tables
Number of positions for indexing axis table 1
Indexing position table 1
Number of positions for indexing axis table 2
Indexing position table 2
Options for indexing positions
Description
Rotary axis
Modulo conversion for rotary axis
Position display is modulo 360°
Axis is indexing axis
Numerator for indexing axes with equidistant positions
Denominator for indexing axes with equidistant posi‐
tions
Indexing position for indexing axes with equidistant po‐
sitions
Hirth tooth system is active
Description
JOG continuous in inching mode
T1: Indexing axes
8.7 Data lists
257