Behavior During Power On - Siemens SINUMERIK 840D Function Manual

Programming
N60 A=ACP(80)
Figure 14-12
(...)
14.5.10

Behavior during POWER ON, ...

Power on
No coupling is active at power ON. Coupling modules are not available.
Axes and spindles
Function Manual, 06/2019, A5E47437747B AA
Example: Modulo reduced rotary axis to linear axis
Position indication for X, A
M3: Coupled axes
14.5 Generic coupling
Comment
; A traverses in the positive di-
rection to 50 degrees, the tra-
versing path is 300 degrees in
the positive direction. X traver-
ses correspondingly by 150 mm in
the positive direction. The end
position is therefore X = 400.
551