Siemens SINUMERIK 840D Function Manual page 494

M3: Coupled axes
14.5 Generic coupling
Type A Type B Type C
1
-
-
-
MCS
COUP - synchronous spindle/multi-edge turning
- - 13
1
-
+
-
MCS
LEAD - master value coupling / curve tables interpolation
- - 13
1
+
+
-
BCS /
MCS
EG - electronic gearbox
- - -
CP - free generic coupling
- - -
494
Type D Type E
Maximum number of master values
From part program and synchronous actions
Superimposition / speed difference permitted
Cascading permitted
Coordinate reference fix (CPFRS="MCS")
9 5 Maximum number of synchronous spindles / multi-edge turning
with the following properties:
→ refer to CPSETTYPE="COUP"
1 1 Maximum number of master values
- - From part program and synchronous actions
+ + Superimposition / speed difference permitted
- - Cascading permitted
MCS MCS Coordinate reference fix (CPFRS="MCS")
9 5 Maximum number of master value couplings / curve tables inter‐
polation with the following properties:
→ refer to CPSETTYPE="LEAD"
1 1 Maximum number of master values
+ + From part program and synchronous actions
+ + Superimposition / speed difference permitted
- + Cascading permitted
BCS / BCS / Coordinate reference (default: CPFRS="BCS")
MCS MCS
9 5 Maximum number of electronic gearboxes
with the following properties:
→ refer to CPSETTYPE="EG"
3 5 Maximum number of master values
- - From part program and synchronous actions
+ + Superimposition / speed difference permitted
- + Cascading permitted
BCS / BCS / Coordinate reference (default: CPFRS="BCS")
MCS MCS
- + Non-linear coupling law (CPLCTID) permitted
9 5 Maximum number of free generic couplings
with the following properties:
Default (corresponds to CPSETTYPE="CP"
3 5 Maximum number of master values
+ + From part program and synchronous actions
+ + Superimposition / speed difference permitted
- + Cascading permitted
1)
1)
1)
)
1)
Axes and spindles
Function Manual, 06/2019, A5E47437747B AA