Projected Coupling (Cpres) - Siemens SINUMERIK 840D Function Manual

M3: Coupled axes
14.5 Generic coupling
CPSETTYPE=
CPFRS
CPBC
CPFPOS + CPON
CPFPOS + CPOF
CPFMSON
CPFMON
CPFMOF
CPLPOS + CPON
CPMRESET
CPMSTART
CPMPRT
CPMBRAKE
Number of leading
axes (∑ LA)
Following axis type
14.5.7.3

Projected coupling (CPRES)

If the coupling type "Synchronous spindle" is set, (see CPSETTYPE), the coupling properties
contained in machine data can be activated instead of the programmed coupling properties.
Further information
S3: Synchronous spindle (Page 847)
Programming
Syntax:
Designation:
Functionality:
Following spindle:
548
TRAIL LEAD
Alarm 16686 Alarm 16686
Alarm 16686 Alarm 16686
Alarm 16686 Alarm 16686
Alarm 16686 Alarm 16686
Alarm 16686 Alarm 16686
with ADD/STOP
Alarm 16686 Alarm 16686
with ADD/STOP
Alarm 16686 Alarm 16686
Alarm 16686 Alarm 16686
Alarm 16686 Alarm 16686
Alarm 16686 Alarm 16686
Alarm 16686 Alarm 16686
Alarm 16672 Alarm 16672
with ∑ LA > 2 with ∑ LA > 1
CPRES= (<following spindle>)
Coupling Restore
Activates projected data of the synchronous spindle coupling to following
spindle FAx.
Type: AXIS
EG COUP
Alarm 16686
with BCS
Alarm 16686
Alarm 16686
Alarm 16686 Alarm 16686
with STOP
Alarm 16686 Alarm 16686
with ADD with ADD
Alarm 16686
Alarm 16686 Alarm 16686
Alarm 16686 Alarm 16686
Alarm 16686 Alarm 16686
Alarm 16686 Alarm 16686
Alarm 16672 Alarm 16672
with ∑ LA > 5 with ∑ LA > 1
Alarm 14092
with axis
Axes and spindles
Function Manual, 06/2019, A5E47437747B AA