Overview - ABB ACS5000 User Manual

9.2.3.1

Overview

If the parameter lock is disabled or unlocked (see "9.2.3.3 Enabling /
unlocking a parameter lock" on page 153) the parameters mode allows
entering the parameter settings for the required drive configuration
depending on the application.
The parameters are organized in functional groups, so called
parameter groups.
Group
Group 07 Control words
Group 08 Status words
Group 09 Fault and alarm words
Group 11
Group 12
Group 16
Group 17
Group 18
Group 19
Group 20 Limits
Group 21
Group 22
Group 23
Note: For details about the parameters, their settings and functions, see
"Appendix G – Signal and parameter table".
When entering the parameters mode for the first time after the auxiliary
supply voltage of the drive has been switched on, the CDP control panel
displays the first parameter of parameter group 11. The next time the
parameters mode is entered, the previously selected parameter displays.
Some parameter settings cannot be changed while the drive is running. If
tried, the following warning displays.
3BHS799208 E01 REV E
Description
Start, stop, direction or
MCB control
Reference selection
System control inputs
DC link control
Utility
Data storage
Start / stop / process stop
Ramp functions
Speed reference
** WARNING **
WRITE ACCESS DENIED
PARAMETER SETTING
NOT POSSIBLE
ACS5000 WATER-COOLED USER MANUAL
Paramet Description
er
21.01 Start function
21.02 Start function
21.03 Off1 stop mode
21.04 Process stop selection
21.05 Process stop signal
21.06 Process stop MCB control
21.07 Process stop mode
.
.
.
21.17 MCB closing time limit
.
21.19 MCB available signal
09 CDP CONTROL PANEL
150/186