Transformer And Motor Cable Terminals; Transformer Cable Terminals; Motor Cable Terminals - ABB ACS5000 User Manual

3.5

Transformer and motor cable terminals

3.5.1

Transformer cable terminals

Note: For information on the location of the terminals, see Fig. 3-7.
3.5.2

Motor cable terminals

The motor terminals are in the back of the COU compartment. To access
them, open the swing frame of the control unit.
Besides of the busbars for motor cable terminations, this unit also
includes the charging transformer for the DC link, the EMC filter and the
EAF filter.
The layout of the motor terminal section depends on the following:
• Frame size (single or double busbars)
• Cable entry (from top or from bottom of the cabinet)
Note: For information on the dimensions and the busbar arrangement,
see "Appendix C – Mechanical drawings".
1
A
Figure 3-16 Motor terminal section of frame size 1 and 2: bottom entry (A) and
3BHS799208 E01 REV E
03 POWER ELECTRONICS AND CABINET FEATURES
2
B
top entry (B)
ACS5000 WATER-COOLED USER MANUAL 54/186