4.4.2
Packing label
The packing labels on the back wall of transport units can also be used for
identification.
ABB
Material no
Material
Order no/positions
Material Document
(1)
The fourth digit from the right identifies the drive that the transport unit belongs
to, ie, drive 1.
4.5
Lifting and transportation
▲
NOTICE
Risk of component damage.
Refer to "Appendix C – Mechanical drawings" before transporting the
drive. This appendix provides details on dimensions, weight, and center of
gravity of the drive.
• To prevent distortions, DO NOT lift and move the drive or a
transport unit with a forklift.
• If the transport units are joined but not yet on the base frame,
DO NOT lift and move them with a crane.
Instead, use appropriate transport means, such as heavy load
hydraulics rollers or air cushions. If in doubt, contact ABB for
instructions.
• To prevent damage to drive components, transport and move the
drive or a transport unit only in upright position.
• To prevent dirt from entering the drive, keep the doors of the drive
or a transport unit closed.
Metallic dust in particular can cause damage and failure when the
drive is energized.
3BHS799208 E01 REV E
Packing Label
3BHB009964R1500
Cabinet ARU/INU LSU config.
(1)
11027727
001241
Project CBA
004902892300012004
ACS5000 WATER-COOLED USER MANUAL
04 TRANSPORTATION, STORAGE AND DISPOSAL
0000
1 ST
67/186