ABB ACS5000 User Manual page 85

1. Assemble the roof attachment.
2. Tighten the bolts firmly.
3. To fix the drive to the ceiling or the back wall, use two suitable struts
per roof attachment (the struts are not part of the scope of delivery).
WARNING! Do not install the struts at a 90° angle to the cabinet
roof (Fig. 5-9).
4. If you fix the drive to the ceiling, use two struts per roof attachment
(1 in Fig. 5-9).
5. If you fix the drive to the back wall, install one strut in a 90° angle to
the drive (2 in Fig. 5-9).
1
~45°
(1) Two struts at 45° to ceiling
(2) One strut at 90° to wall
3BHS799208 E01 REV E
2
~45°
Figure 5-9 Recommended ceiling and wall fixings
ACS5000 WATER-COOLED USER MANUAL
~90°
(3) Do not install the struts at a 90°
angle to the cabinet roof
05 MECHANICAL INSTALLATION
3
85/186