Operation; Operating Conditions; Safety; Overview - ABB ACS5000 User Manual

8.

Operation

8.1

Operating conditions

The operating conditions for the drive are according to IEC 60721-3-3.
Classification: 3K22 / 3B1 / 3S6 / 3M11
8.2

Safety

The drive system must only be operated by qualified and authorized
personnel, ie, personnel who are familiar with the operation of the drive
system and the hazards involved.
8.3

Overview

This chapter outlines the local operation of the drive.
Control of the drive via a PLC or higher-level control system is not
described in this chapter. If the drive is controlled from remote, see the
applicable manuals for information.
The status messages and parameter settings used in this chapter are
typical examples to illustrate the related instructions and display
functions and may therefore differ from the actual status messages and
parameter settings in the drive.
8.4

Local operator panel

The operator panel on the control compartment enables the operator to
control the drive without restrictions, provided that all requirements for
normal operation are met. The functions of the local operator
panel include:
• Connecting and disconnecting the main power supply
• Setting the reference value
• Starting and stopping the drive system
• Displaying: Actual values, status messages and alarm and
fault messages
• Viewing and setting parameters
• Resetting alarm and fault messages
• Activating the emergency-off
• Testing lights and illuminated pushbuttons
3BHS799208 E01 REV E ACS5000 WATER-COOLED USER MANUAL 123/186