6.7.1.2
Preparing cables for cable entries with cable glands
Prepare cables with an outer cable screen or shield for EMC bonding with
the metal enclosure of the cabinet as illustrated.
1
2
3
(1) Cable gland
(2) Plate
(3) Heat-shrinkable termination
(4) Outer cable sheath
3BHS799208 E01 REV E
Figure 6-13 Preparing power cables for cable glands
ACS5000 WATER-COOLED USER MANUAL
4
5
7
6
(5) Conductor insulation removed to
expose cable shield
(6) Cable screen extension to be
connected to PE ground busbar
(7) Sheath seal
06 ELECTRICAL INSTALLATION
106/186