5.13
Joining busbars
There are three types of busbars that need to be joined:
• AC busbars (Fig. 5-10: 1)
• PE ground busbar (Fig. 5-10: 2)
• DC busbars (Fig. 5-10: 3)
1
2
3
1. Before installing the joining pieces, grease the bolts to maintain the
required contact pressure.
2. Join the busbars.
3. Tighten the bolts to the torque of 40 Nm.
3BHS799208 E01 REV E
Figure 5-10 Busbar connections
ACS5000 WATER-COOLED USER MANUAL
05 MECHANICAL INSTALLATION
87/186