Preparing Cables For Cable Entries With Cable Glands; Connecting The Cables; Figure 6-22 Preparing Control Cables For Cable Glands - ABB ACS5000 User Manual

6.8.1.2. Preparing cables for cable entries with cable glands

Prepare the cables with an outer cable screen for EMC bonding with the metal
enclosure of the cabinet as illustrated.
1
2

Figure 6-22 Preparing control cables for cable glands

1) Outer cable sheath
2) Cable gland
3) Conductor insulation removed to expose
cable shield

6.8.2. Connecting the cables

– For information on project-specific connections, see "Appendix D -
Wiring diagrams".
– For information on terminal sizes, see document "Customer interface".
PRODUCT
ACS5000W
DOCUMENT KIND
User manual
3
4
5
4) Plate
5) Conductor screen extension to be
connected to PE terminal
DOCUMENT ID.
3BHS799208 E01
ELECTRICAL INSTALLATION
REV. LANG. PAGE
F en 109/178