S800 I/O Modules; Figure 10-5 Example Of S800 I/O Station - ABB ACS5000 User Manual

10.5.3. S800 I/O modules

LEDs on I/O modules having the same meaning on all types of I/O modules are
always at the same position. The LEDs are always at the topmost position on each
module (Fig. 10-5: 1) and are identified as follows:
– F: fault
– R: run
– W: warning
– O or OSP (only output modules)

Figure 10-5 Example of S800 I/O station

LED Color
F Red
R Green
W Yellow
O Yellow
OSP Yellow
For more information, see the following manuals:
– S800 I/O - General information and installation, user's guide
– S800 I/O - Modules and termination unit, user's guide
PRODUCT
ACS5000W
1 1
Indication
Indicates failure
Device is operating normally
External fault or minor fault in the module
Indicates an active signal
Indicates an active signal (output set as predetermined)
DOCUMENT KIND
User manual
PREVENTIVE AND CORRECTIVE MAINTENANCE
1
DOCUMENT ID.
3BHS799208 E01
1
REV. LANG. PAGE
F en 163/178