Storage; Storage Conditions - ABB ACS5000 User Manual

4.6. Storage

4.6.1. Storage conditions

The minimum requirements for storage are based on IEC 60721-3-1.
– Classification: 1K22 / 1B1 / 1C2 / 1S11 / 1M11
The drive can be stored for up to one year in the original packaging as long as it is
not damaged or opened. For information on longer storage periods, contact the
ABB service organization.
4.6.2. Storage
If the drive is taken out of service for a longer time proceed as follows:
1. Drain the cooling circuit completely or add the appropriate amount of glycol
for frost proofing if the drive is to be stored in ambient temperatures below
0 °C.
For information about draining and frost proofing, see the manual of the water
cooling unit in "Appendix A - Additional manuals".
2. Cover all cable inlets and ventilation slots with an impermeable plastic or
aluminum foil and a wooden panel.
3. Add a desiccant of the appropriate quality:
• One unit desiccant (30 g) absorbs 6 g water vapor
• When using a polyethylene foil: 10 units/m
4. Close and lock the doors of the drive.
5. Use polyethylene or equivalent for packaging:
2
• 0.3 g/m /24 h water vapor diffusion
6. Attach humidity indicators to the packaging.
NOTICE The storage conditions and the packaging should be checked
regularly. Any damages which occur during the storage period must be
repaired immediately.
PRODUCT
ACS5000W
DOCUMENT KIND
User manual
TRANSPORTATION, STORAGE AND DISPOSAL
2
foil
DOCUMENT ID.
3BHS799208 E01
REV. LANG. PAGE
F en 64/178