Starting The Drive System After An Emergency-Off - ABB ACS5000 User Manual

8.9.2. Starting the drive system after an emergency-off

1. To start up the drive system after an emergency-off, unlatch the EMERGENCY-
OFF push button.
The EMERGENCY-OFF push button returns to its initial position when turned
into the direction indicated by the arrows on the push button.
2. To reset the emergency-off safety relay of the drive, press EMERGENCY-OFF
RESET button.
After resetting, the drive status message changes to ReadyOn.
1 L -> 0.0 rpm
StateINU ReadyOn
MOTOR SP 0.00 rpm
POWER 0.0 kW
The main power supply can be connected to the drive, and the drive can be
started again.
PRODUCT
ACS5000W
DOCUMENT KIND
User manual
DOCUMENT ID.
3BHS799208 E01
OPERATION
REV. LANG. PAGE
F en 129/178