Local And Remote Control Mode; Local Control; Disabling / Enabling Local Lock Function - ABB ACS5000 User Manual

6. To cancel the setting and keep the original setting, press any of the mode
selection keys. The selected keypad mode is entered.
ACT PAR FUNC DRIVE

9.2.5. Local and remote control mode

The local-remote feature of the CDP control panel allows selecting the control
location of the drive. Possible are:
– Local control (L)
– Remote control (R)
NOTE – In this context, remote control is not necessarily equivalent to higher-
level control. For more information, see "9.2.5.4 Remote control" on page 151.

9.2.5.1. Local control

In local control mode, full operational control of the drive is enabled from the local
operator panel. Commands from remote have no effect.
– To enter the local control mode, press the LOC-REM key.
Local control is indicated by the letter L.

9.2.5.2. Disabling / enabling local lock function

Accidental switching from remote control to local control can be prevented with
the local lock function.
The corresponding parameter is 16.04 LOCAL LOCK and belongs to the parameter
group 16 SYSTEM CTRL INPUTS.
PRODUCT
ACS5000W
1 L ->
UPLOAD
DOWNLOAD => =>
CONTRAST
1 L ->
StateINU
MOTOR SP
POWER
DOCUMENT KIND
User manual
0.0 rpm
<= <=
6
600.0 rpm 0
ReadyRun
0.00 rpm
0.0 kW
DOCUMENT ID.
3BHS799208 E01
CDP CONTROL PANEL
REV. LANG. PAGE
F en 150/178