8.4. Local operator panel
The operator panel on the control compartment enables the operator to control
the drive without restrictions, provided that all requirements for normal operation
are met. The functions of the local operator panel include:
–
Connecting and disconnecting the main power supply
–
Setting the reference value
–
Starting and stopping the drive system
–
Displaying: Actual values, status messages and alarm and fault messages
–
Viewing and setting parameters
–
Resetting alarm and fault messages
–
Activating the emergency-off
–
Testing lights and illuminated push buttons
1
2
3
Figure 8-1 Local operator panel
PRODUCT
ACS5000W
1) CDP control panel
• Starts / stops drive and motor
• Displays status messages
• Displays alarm and fault messages of the drive and
monitored foreign equipment
• Resets alarm and fault messages
For more information, see "9 CDP control panel" on page 133.
2) Main power supply off
• Illuminated push button opens the main circuit breaker
3) Main power supply on
• Illuminated push button charges the DC link and closes the
main circuit breaker
4) Alarm fault lamp
• Flashing light: alarm
• Permanent light: fault
4
5) Emergency-off reset push button
• Resets the emergency-off relay in the drive control system
5
• Flashes when the auxiliary voltage is switched on, or when
an emergency-off switch is pressed
6) Emergency-off latching push button
• Prevents starting when pressed at standstill of the drive
6
• Main circuit breaker opens and DC link discharges when
pressed during operation of the drive
DOCUMENT KIND
User manual
DOCUMENT ID.
3BHS799208 E01
OPERATION
REV.
LANG.
PAGE
F
en
118/178