About This Manual; Equipment Covered By This Manual; Structure Of The User Documentation - ABB ACS5000 User Manual

1. About this manual

1.1. Equipment covered by this manual

This manual covers standard drive and provides generic information on the drive.
The manual does not claim to cover all variations and details of the drive, nor to
consider all eventualities that may arise during installation, commissioning,
operation and maintenance of the drive.
If the drive is adapted to specific customer needs or applications, and handling,
installation, and operation of the drive are affected by these modifications,
information on these modifications is provided in the appropriate documentation
(such as layout drawings, wiring diagrams, project-specific data, engineering
notes).
If information is required beyond the instructions in this manual, refer the matter
to ABB.

1.2. Structure of the user documentation

The documentation for a standard drive consists of this document and the
following project-specific appendices.
NOTE – These appendices are NOT included in this document.
Appendix A - Additional manuals provides manuals about additional equipment
–
delivered with the drive (such as project-specific options like pulse encoder or
fieldbus interfaces), or information on modifications of the standard drive.
– Appendix B - Technical data contains the technical data sheets of the drive.
Appendix C - Mechanical drawings provides the outline drawings of the drive. The
–
drawings are generated according to the customer-specific project.
– Appendix D - Wiring diagrams contains the circuit diagrams with information on
device identification, cross-reference and device identification conventions.
The diagrams are generated according to the customer-specific project.
"Setting of protective devices" is generated according to the customer-
specific project.
– Appendix E - Parts list produced for each project and contains all information to
identify a component.
Appendix F - Test reports and certificates provides the test reports of the drive.
–
Quality certificates, and codes and standards the drive complies with are
added if necessary for the project.
– Appendix G - Signal and parameter table includes descriptions of actual signals,
control and status words, and control parameters and their default settings.
PRODUCT
ACS5000W
DOCUMENT KIND
User manual
DOCUMENT ID.
3BHS799208 E01
ABOUT THIS MANUAL
REV. LANG. PAGE
F en 15/178