6.5. Internal wiring
For information on each individual connection, see the Converter hardware
diagram in "Appendix D - Wiring diagrams".
Internal wiring comprises all cabling and wiring across shipping splits, and
includes:
–
Signal cable connection
–
Auxiliary power supply cable connection
–
Optical fiber connections
–
Arc Guard sensor cabling
Make the above mentioned connections through the cable duct in the upper part of
the drive cabinet (Fig. 6-7 and Fig. 6-8).
Additionally there is one charging cable to be connected. The charging cable is
located at the bottom of the drive cabinet behind the water pipe.
The cables and wires can be identified by their specific designation. All cables are
prepared for connection and are also marked with the corresponding terminal
designation.
PRODUCT
ACS5000W
DOCUMENT KIND
User manual
DOCUMENT ID.
3BHS799208 E01
ELECTRICAL INSTALLATION
REV.
LANG.
PAGE
F
en
91/178