Remove Peripherals - HP 3000 Series Handbook

For HP Internal Use Only
Remove Peripherals
1. Remove bezel.
Remove Peripheral Drawer
1.
See Figure 8-4.
2. Remove two TORX screws.
3. Lift the peripheral drawer to clear the locks on the system cabinet and pull it out of the
system cabinet. Be careful not to strain the power and SCSI cables.
4. Set the peripheral drawer on a supporting surface.
5. See Figure 8-14.
6. Disconnect the SCSI flat ribbon cable from the DDS and the disk.
7. Disconnect the power connectors from the DDS and the disk.
8-12 Replaceable Parts