Remove Dc On/Off Switch - HP 3000 Series Handbook

For HP Internal Use Only
Remove DC On/Off Switch
1.
See Figure 8-27.
2. Using a pair of small needle-nose pliers, bend the four tabs on the switch retainer bracket
to a vertical position.
3. Lift the switch out of the bracket.
4. Disengage the cable from the cable retaining tabs on the right side of the cabinet.
5. Disconnect the DC On/Off cable from the power control module in the power supply.
Tab
LG200185_152
Figure 8-27. DC On/Off Switch Removal
8-48 Replaceable Parts