Disk Part Numbers; 3.5-Inch Hard Disk Drive (A2445A And A3087 A) Configuration; Disk Numbers; Option Settings For 3.5-Inch Hard Disk Drives (A2445A And A3087 A) - HP 3000 Series Handbook

For HP Internal Use Only
Disk Part Numbers
Table 4-14 lists the product and part numbers associated with the disk drives introduced with
the HP 3000 9x8 Family and HP 9000 Model 800 Ex5 Class systems.
Table 4-14. Disk Numbers
Disk Size Product Manufacturing Part Number Exchange
Capacity Number Product Number on Disk Part Number
3.5-inch 1GB A2445A C2247 0950-2362 C224 7-69365
3.5-inch 535MB A2958A
N/A
A2958-60001 A2958-69001
3.5-inch 2GB A3087A C2490 C2490-60635 C2490-69635
3.5-inch Hard Disk Drive (A2445A and A3087 A) Configuration
Caution
I
• The drive configuration is set for the system it is installed in. Changing the
configuration may cause the drive to malfunction.
• Devices outside the system will be configured differently.
• The connector jumpers are not interchangeable from one connector to
another. Interchanging the jumpers may damage the connectors.
The drive configuration is set with jumpers on the address/option connector (see Figure 4-10).
A pin-set is shorted with a jumper installed or open without a jumper. Table 4-16 lists pin-set
functions
Table 4-15.
Option Settings for 3.5-inch Hard Disk Drives (A2445A and A3087 A)
Function Pin-set Setting
Write Protect/ 1 Open
Power-Fail Reset
Unit Attention 2
Open
SDTR
3
Jumpered
Parity
4 Jumpered
Auto Spin-up
5
Jumpered
Sync Spindle
7,8 J umpered, Open
SCSI Address
10,11,12 Device address
SCSI-1/SCSI-2
Open
Power- Fail Reset
Open
Enable
Terminator Power
See Note below.
Terminator Enable
See Note below.
J umpered-Terminated
Open-No Termination
Configuration 4-31