For HP Internal Use Only
Optional Configuration Jumper Switch
Set the switches on the bottom of the drive as shown in .Figure 4-13.
Figure 4-13. Optional Configuration Jumper Switch
CD-ROM Drive Configuration
Caution
I
Options
The drive configuration is set for the system it is installed in. Changing the
configuration may cause the drive to malfunction.
Devices installed outside the system will be configured differently.
The drive configuration is set with jumpers on the option connector (see Figure 4-14). A
pin-set is shorted with a jumper installed, or open without a jumper. Table 4-21 lists the
option connector pin-set functions.
4-40
Configuration