HP 3000 Series Handbook page 59

Note
For HP Internal Use Only
Table 4-5. SCSI Bus Specifications
Parameter
Characteristics
Features 8-bit bus.
Connects up to 7 devices per adapter.
Bus arbitration
Parity Checking (default
=
parity enabled)
Maximum Cable Length
6 meters, including any internal
(single-ended SCSI bus) lengths in all devices.
SCSI Bus Connection Single-ended
Termination Requirement The SCSI bus requires termination. The terminator
MUST be connected to the last device on each end
of the bus.
Active Terminator
1
The last SCSI device must have +5V termination
power enabled.
Address 0- 7
7
=
host (highest priority)
0
=
lowest priority
1
Active termination is required outside the system cabinet. Passive
termination is allowed in the system cabinet.
4-8 Configuration