Mitsubishi Electric MELSEC iQ-R Series User Manual page 132

CH1 Range setting monitor (offset/gain setting)
The offset/gain values set in 'CH1 Range setting (Thermocouple type)' (Un\G598) or 'CH1 Range setting (Resistance
temperature detector type)' (Un\G598) can be checked.
Monitor value
0
1
■Buffer memory address
The following shows the buffer memory address of this area.
Buffer memory name
CH Range setting monitor (offset/gain setting)
Range setting monitor (offset/gain setting) [Q compatibility]
With the Q compatible mode function used, offset/gain values, which are set in the input range setting, can be checked.
b15 b14 b13 b12 b11 b10 b9
0 0 0 0 0
(2)
(1) 0: Factory default setting, 1: User range setting
(2) The values of b8 to b15 are fixed to 0.
■Buffer memory address
The following shows the buffer memory address of this area.
Buffer memory name
Range setting monitor (offset/gain setting)
The monitor values are the same as those of R mode.
APPX
130
Appendix 3 Buffer Memory Areas
CH1
431
b8 b7 b6 b5 b4
0 0 0 CH8 CH7 CH6 CH5
CH1
22
Description
Factory default setting
User range setting
CH2 CH3 CH4
631 831 1031
b3 b2 b1 b0
CH4 CH3 CH2 CH1
(1)
CH2 CH3 CH4
CH5 CH6 CH7
1231 1431 1631
CH5 CH6 CH7
CH8
1831
CH8